Forum Hosting, Guestbook Hosting, or Website Poll for your website.
Register Login Calendar
 
Pro-Systems Racing Carburetors > Forums > Enough carb?
 
Username:  
Password:  
 
   
 


Reply
 
Author Comment
 
Mel Miller

Registered: 02/21/12
Posts: 1

    02/21/12 at 08:19 PMReply with quote#1

In Sept. of 2010 you built me carb. invoice 27739.  Carb. has worked flawless and I couldn't be happier.  Since then engine is seeing a LOT of changes.  Heads have been max ported and flow 362@.750 and 237 @.750.  Compression has been raised from 11/1 to 14/1 with a .728 lift 270-278 dur. on a 110 c/l roller cam.  Car now weighs 2875 with me.  Stall is going to be around 5000 flash, and car is footbraked.  Is this enough carb. or am I leaving a lot on the table?
PRO-SYSTEMS

Moderator
Registered: 12/16/11
Posts: 302

    02/21/12 at 10:53 PMReply with quote#2

Hi Mel,

I got a good chunk of the information I need.  BUT, I will take more if I can get it.

If you would, fill out one of our Online Quote/Order forms.  We do many of these per day and its puts your info in a more usable format and easier for us to reference/review your data to come up with a plan for you.  Then just E it in and I'll e you back after I review your program.   We cut/paste and compare this data to 15 years of builds we have done and we do those every hour or two M-F until 9 p.m.


Watch for an e mail back informing you "Hey I got your quote and I am working on it"   So you know you did it right.  You will get this e mail back within about 60 seconds of when you hit "SUBMIT" and send the quote form over.

Click this link: http://www.prosystemsracing.com/quote.html

Also put your Pro Systems carb serial number in the comments section so I can look up its specs.
Previous Topic | Next Topic
Print
Reply