Hi Patrick, thanks for starting this great forum it is good so the jerks cant confuze things.

I have a dominator Pro System carb with 2791 on the side of the top and 10529 on the end with a ps.  On the side by the lever it has a 95 with xx over that and 95.  The metering blocks both have 3 on the corner.

What should the jets be?  The guy I got it from said he put 82 because it is so rich when he drives around except than it slowed down at the strip. 

I have a machinest frend with little drill bits who says he can measure all the little jets and bleds if I can find out what all the whole sizes shoud be.  The guy who changed the jets says he didn’t have a sheet with it.

Thanks if you can help us get this fixed.

Josh