Ask the Carb Guy
Sign up Calendar
 
 
 


Reply
  Author   Comment  
410mopar

Registered:
Posts: 4
Reply with quote  #1 
Have an issue setting the idle on my 850. Its used and may have been played around with. When the transfer slots are 0.020 or .030 it will barely idle and dies immediately in gear. At this TS setting there is very little response with idle mixture screws. If the TS is set at .040 the vehicle will idle and no mixture screw response at all. Very rich though at .040 with all the fuel discharging through TS. Everything has been cleaned and inspected thoroughly. Air bleed is 67 and IFR is 38. Any recommendations
PRO-SYSTEMS

Moderator
Registered:
Posts: 3,660
Reply with quote  #2 
Perhaps the carb is not built properly for the combination.

What is the carbs number?

What do you have it on?

__________________
Patrick James-President
Previous Topic | Next Topic
Print
Reply

Easily create a Forum Website with Website Toolbox.